Soil Sampling Drill Rig

Product Introduction:

The HM-QY800 handheld soil sampling drilling rig is a lightweight soil collection drilling rig designed based on reference to large hydraulic, gasoline, and pneumatic drilling rigs. Even inexperienced drilling personnel can operate with simple training. The sampling process is extremely simple, and only 1 to 2 people can complete the operation of the equipment. The entire drilling process does not require adding water, ensuring the quality of the sample obtained (no pollution, no disturbance).

Compared with conventional large drilling rigs, the HM-QY800 soil sampling drilling rig is more convenient to carry, easier to operate, and can be easily operated by non professionals. In some project sites with low depth requirements (within 10 meters), relatively complex terrain, and difficult access for large equipment, using this equipment is the best choice.

Compared with traditional hand drills, the HM-QY800 soil sampling rig drills deeper, has higher sampling efficiency, and obtains undisturbed and compressed soil samples (depending on the terrain). In projects with sampling depths exceeding half a meter and high requirements for soil sample quality (undisturbed, non compressed), using this equipment is the best choice.

Product Introduction Features:

Fast footage, the sample remains in its original state without disturbance!

It can be sampled using the built-in PVC sampling tube or directly!

The ideal depth for sampling conventional soil layers is 1-5 meters, and for soft soil layers it can reach up to 10 meters!

● Hand pulled start, stop trigger button, spring isolated seismic handle!

The puller adopts a more reasonable ergonomic design, which can be pressed by hand or foot!

Product parameters:

1. Sampling depth: 1-10 meters (optional)

2. Vibration frequency: 1300 times/minute

3. Power: 1.6 horsepower (7000rpm)

4. Engine type: Single cylinder two-stroke engine

5. Fuel consumption: not exceeding 0.6L/h

6. Weight: 20.2 kg (main unit)

7. Sample tube specifications: inner and outer diameters not less than 35mm/40mm; Length not less than 1.00 meters per piece

8. Sampling depth, can be connected to a drill rod for one-time sampling without lifting the drill midway

9. Pulling device: Quick pulling, speed not less than 3.00 meters per minute

Standard configuration:

One gasoline powered engine, one set of engine tool kit, optional standard soil drill bits and hard soil drill bits, 5 drill rods not less than 1 meter, 2 plastic sample tubes not less than 1 meter, 1 scraper, pliers, headphones, 5M tape measure, gloves, cleaning brush, 1 set of dedicated lifting equipment, and 1 industrial plastic transport box

• Previous article：no more
• Next article：no more